TX136/500 v1.11 FST4W mode added

General discussion

TX136/500 v1.11 FST4W mode added

Postby F4GCB » 31 Oct 2020 14:14

Hello the TX136/500 builders,

This new unofficial version 1.11 gives the following changes :

- FST4W mode added : http://physics.princeton.edu/pulsar/k1jt/FST4_Quick_Start.pdf
- Harmonization of timeslots control



Having no TX500 this software has been validated on TX136.
If you update with this version don’t forget that the calibration and configuration values will be reset. For the ones who will try it, thanks in advance for your feedback.

73, Patrick F4GCB
Attachments
TX136-500 v1.11 (C-source+HEX load file).zip
FST4W mode added
(216.83 KiB) Downloaded 18 times
F4GCB
 
Posts: 29
Joined: 27 Aug 2014 19:03
Location: France

Re: TX136/500 v1.11 FST4W mode added

Postby F4GCB » 31 Oct 2020 14:15

Here is the V1.11 manual.

73, Patrick F4GCB
Attachments
TX136-500 v1.11 (instructions).zip
Manual
(317.74 KiB) Downloaded 18 times
F4GCB
 
Posts: 29
Joined: 27 Aug 2014 19:03
Location: France

Re: TX136/500 v1.11 FST4W mode added

Postby F4GCB » 31 Oct 2020 14:16

And as usual for our Japanese friends, here is the version 1.11j which limits the RF power according to the portable regulation in Japan.

73, Patrick F4GCB
Attachments
TX136-500 v1.11j (HEX load file).zip
Japonese portable regulation
(97.38 KiB) Downloaded 19 times
F4GCB
 
Posts: 29
Joined: 27 Aug 2014 19:03
Location: France


Return to Juma Discussion

Who is online

Users browsing this forum: Bing [Bot] and 1 guest

cron