TX136/500 v1.12 FST4W bug fixed

General discussion

TX136/500 v1.12 FST4W bug fixed

Postby F4GCB » 28 Dec 2020 09:50

Hello the TX136/500 builders,

This new unofficial version 1.12 cancel and replace the version 1.11 for a FST4W bug fixed :

- no TX shifts initialization at TX startup which results in a simple carrier in transmission
- TX shifts initialization only when speed change

Having no TX500 this software has been validated on TX136.

73, Patrick F4GCB 

Attachments
TX136-500 v1.12 (C-source+HEX load file).zip
FST4W bug fixed
(233.68 KiB) Downloaded 29 times
F4GCB
 
Posts: 33
Joined: 27 Aug 2014 19:03
Location: France

Re: TX136/500 v1.12 FST4W bug fixed

Postby F4GCB » 28 Dec 2020 09:51

Here is the V1.12 manual.

73, Patrick F4GCB
Attachments
TX136-500 v1.12 (instructions).zip
Manual
(299.23 KiB) Downloaded 29 times
F4GCB
 
Posts: 33
Joined: 27 Aug 2014 19:03
Location: France

Re: TX136/500 v1.12 FST4W bug fixed

Postby F4GCB » 28 Dec 2020 09:52

And as usual for our Japanese friends, here is the version 1.12j which limits the RF power according to the portable regulation in Japan.

73, Patrick F4GCB
Attachments
TX136-500 v1.12j (HEX load file).zip
Japonese portable regulation
(97.46 KiB) Downloaded 27 times
F4GCB
 
Posts: 33
Joined: 27 Aug 2014 19:03
Location: France

Re: TX136/500 v1.12 FST4W bug fixed

Postby F6CWA » 05 Jan 2021 15:43

Hello
Thanks for working on the new V1.12
which includes modifying the fst4w-120 mode.
I just tested, all the modes work well, all speed
on the tx136 and the tx500.
A big thank you Patrick.
73 Hubert // f6cwa
F6CWA
 
Posts: 12
Joined: 08 Jan 2013 21:02
Location: France JN24NI


Return to Juma Discussion

Who is online

Users browsing this forum: No registered users and 1 guest

cron