JUMA 100D RF sense with SunSdr 2 pro

General discussion

JUMA 100D RF sense with SunSdr 2 pro

Postby LZ1ZJ » 07 Dec 2018 11:20

A friend of mine finished the build of my JUMA 100D amplifier witch I bought at the end of October 2018. It all works very well. The only problem I have is that when I want to switch from 3.5 to 7Mhz or 7Mhz to 14 Mhz, via the RF SENSE mode, the amplifier enters standby mode and the display shows "CURR" and this is accompanied by a beep.This never does do not happen in the reverse order of 7 to 3.5Mhz or 14 to 7Mhz. All others band is OK. The radio I use is Sun SDR 2 Pro.
LZ1ZJ
 
Posts: 6
Joined: 07 Dec 2018 10:59
Location: Bulgaria

Return to Juma Discussion

Who is online

Users browsing this forum: No registered users and 16 guests

cron